Base 45681-210APO with XP95 APOLLO Addressing
Operation
A ground connection is not required for safety or proper operation of detectors. The ground terminal (terra) It is isolated and is provided for an orderly termination grounded shielding conductors or cables and maintaining the continuity of the earthing, when necessary.
All terminals are marked according to their function.
The bases have a large inner diameter for easy access to cables and terminals and there are two slots for fixing screws. The grooves allow two screws are located at a spacing of 51 a 69 mm.
The detectors fit only the bases in a manner, unobstructed, and require rotation clockwise without pushing force to be connected.
key features
- XPERT addressing
- unidirectional adjustment detector
- lock feature to prevent unauthorized removal of the detector
Base Standard MB-00012Conventional APO for ORBIS APOLLO
Orbis LX base has two slots for fixing screws spaced 51 e 69 mm.
The detectors in the base fit only one way and requires no rotation force clockwise in order to be connected.
Key Features
- One way fit
- Detector locking mechanism
Apollo Botoneira
The manual call point Smart is designed to operate in a loop of intelligent fire detection devices.
An alarm is initiated by pressing the resettable element.
The manual call point signals to the machine control and indication using an interrupt feature in Apollo digital protocol.
An alarm status is indicated by the rotation of the reconfigurable element, displaying yellow and black indication bars and a solid red LED.
The manual call point can be easily reset by using the provided front reset button.
key features
- resettable operating element
- Easy access, Front reset mechanism
- System for fitting and installation Z
- ergonomic reset button
- Certified in 54-11 the AND 54-17
- visible LED 170 °
- continuity link for cable insulation tests
- Suitable for semi-embedded or surface mount
Analog entrance panel SA5900-908APO with XP95 APOLLO Isolator
electric Description
The point of intelligent manual call is loop powered and operates on 17-35V dc.
Operation
The address of each call point is set in the commissioning stage by means of a DIL switch.
A solid red alarm LED is provided in the manual call point. This LED is controlled irrespective of the point of call, Control panel. The LED will flash yellow if there is a fault and flashes green when the device is searched. Discovery and configurable CoreProtocol.
Once activated, intelligent manual call point can be reset by inserting the reset button on the LED facing forward, turning clockwise until a positive click and redefinition occur.
The intelligent manual call point incorporates a short circuit isolator to ensure its operation in case of a short circuit in the circuit. The isolator operation is indicated by a solid yellow LED. For more details on the insulator, see data sheet PP2090, available upon request.
This manual call point helps reduce installation time, For all the initial installation cable is connected to a removable terminal block that fits perfectly on the back of the manual call point.
Mechanical construction
The call point components are molded in a fire resistant polycarbonate.
Communication
Compatible with XP95, Discovery e CoreProtocol
Backward compatibility
The smart manual call point will work with compatible Apollo control equipment using the XP95 protocols, Discovery and digital CoreProtocols.
EMC Directive 2014/30 / EU
The point of intelligent service manual complies with the essential requirements of the EMC Directive 2014/30 / EU, provided it is used as described.
A copy of the Declaration of Conformity is available from Apollo, upon request.
Compliance intelligent manual call point with the EMC Directive does not confer compliance with the policy on any device or system connected to it.
Regulation of construction products 305/2011
The point of intelligent service manual complies with the essential requirements of Regulation of construction products 305/2011.
A Performance Statement copy is available at the Apollo, upon request.
Product Info
The manual call point Smart is designed to operate in a loop of intelligent fire detection devices. An alarm is initiated by pressing the resettable element. The manual call point signals to the machine control and indication using an interrupt feature in Apollo digital protocol. An alarm status is indicated by the rotation of the reconfigurable element, displaying yellow and black indication bars and a solid red LED. The manual call point can be easily reset by using the provided front reset button.
key features
- resettable operating element
- Easy access, Front reset mechanism
- System for fitting and installation Z
- ergonomic reset button
- Certified in 54-11 the AND 54-17
- visible LED 170 °
- continuity link for cable insulation tests
- Suitable for semi-embedded or surface mount
Detector Optical Smoke Series 65 Apollo
The optical smoke detector of the series 65 uses light detection technology to detect a fire.
The mold has an external detector LED that turns white in idle state, but produces red light in alarm.
Operation
The optical smoke detector of the series 65 shaped and has a self-extinguishing polycarbonate shell with white smoke inlets wind-resistant. The contacts of stainless steel cleaner nickel connect the detector to the base. Under the Hood, a printed circuit board has mounted the optical system on one side and the electronics processing other signals. The detection chamber is configured black frame like a maze that prevents the penetration of ambient light. The maze has a thin covering resistant gauze insects. The camera houses an LED infrared light (LED) and a photo diode that has a full visible light filter as extra protection against ambient light.
Every three seconds, the LED emits collimated light explosion, modulated at 4 kHz. In air, the LED light does not fall directly on the LED because the LED is positioned at an obtuse angle to the diode.
When smoke enters the chamber, a fraction of the collimated light is scattered in the photo diode. The resulting signal from the photo diode is above a predefined threshold, the LED will light two more explosions, this time at two-second intervals. If the light is scattered in photodiode for both wrists – due to the presence of smoke – the detector signals an alarm condition by activating the alarm latch, increasing the current drawn from the source of about 40μA to a maximum of 75mA. This drop in impedance detector is recognized by the control panel as an alarm signal.
The alarm current also illuminates the full LED detector. A remote indicator connected between the terminal IN and terminal L1 will -R a voltage to power supply least 1 volts through it and, like this, will light.
To ensure proper operation of the detector, the control panel should be arranged to provide a maximum of 33 Volts dc and a minimum of 9 Dc volts in normal operation. The power may fall 6 Volts DC alarm conditions a feed stream of at least 10mA voltage is available in that. To ensure effective illumination of the integral LED and any remote indicator, the detector power must exceed 12 Volts.
To restore the detector to the rest condition, it is necessary to expel any smoke and interrupt the electrical supply to the detector by at least one second.
key features
- Responds well to fire smoldering and smoking
- Suitable for bedrooms and escape routes
- It is not affected by wind or atmospheric pressure
- Intermittent test option key operated LED and magnet
Detector A1R Orbis thermovelocimeter
The Orbis thermovelocimeter detector monitors the temperature, using a single thermistor providing an output voltage proportional to the temperature of outside air.
environmental characteristics
The environmental performance is similar to the Orbis optical smoke detector, but it should be noted that heat detectors are designed to operate in specific ambient temperatures.
Product Info
Orbis Termovelocimétrico The detector monitors the temperature using a single temperature sensor which provides an output voltage proportional to the temperature of the outside air.
key features
- It can be used for applications where smoke detectors are unsuitable
- Ideal for dirty environments or smoke under normal conditions
- The red LED flashing at startup confirms that the device is working.
- SensAlert®, LED blinking amber indicates a failed operation
- The FasTest® takes only four seconds to test and confirm that the detectors are working properly